Leaking Sprinkler Head Replacement Service - Lexington, S.C.


Lexington Sprinkler Repair

 

Call (803)331-5323

sprinkler, irrigation, repair, Service, Lexington S.C.

Common System Malfunctions, Repairs & Troubleshooting:

Sprinkler Head Repair Service
Leaking Rotary or Popup Heads
Bad Control Panel
Zone won't come on
Broken Water Main or leaky valve

Tip: Use our handy irrigation dictionary to help you describe what you need!

    We also Offer:

 

 

Do you have Sprinkler Heads that Leak?

Often times, sprinkler systems on a slope have a leaking sprinkler head at the bottom part of the slope*.  This is due to the inordinate amount of water pressure that is on that lowest head, causing the seal to leak.  Other problems exist when heads are placed too high or too close to heavy traffic and are broken (this could mean that you need to bury the head deeper), causing water to be wasted, puddling, algae, or depressurizing the zone on which it is attached.  This depressurization can cause lack of coverage and lead to the decline of your lawn due to lack of sufficient moisture.  Another common problem is a leaky nozzle which would call for a simple replacement of the nozzle.  Any of these problems can cause a soggy lawn, which will eventually lead to bare spots.

To replace a leaking sprinkler head, you must first make sure that the control panel is in the "off" position.  Once the timer is off, you can then remove the head by turning it counter clockwise, loosening it from the elbow fitting below the ground.  Remove the old head and replace with a new head turning the new head clockwise and tightening it slightly.  You will then need to turn the head to align it with whichever side is fixed (Rainbird's fixed position is the left side but Hunter Brand is fixed to the right side) and in the direction you want the fixed side to spray.  Once the fixed side is aligned, you can then set the adjustable or variable side of the spray path to the desired angle. 

*Note: if attempting to fix a problem as described above, you may need to insert a special gasket in the head which prevents the excess pressure from opening the seal.

We service Lake Murray, Irmo, and the Town of Lexington and look forward to being of service - Schedule an Appointment by calling (803)331-5323, email us at LexingtonSprinklerRepair@gmail.com , follow us on twitter or network with us on FaceBook


 

bing

Lexington, South Carolina



 

Links | Site Map

Copyright and Intellectual Property Rights Enforced